[A]: Tools needed to assemble Flight Deck GA: 5/16" wrench (or socket), 11/32" wrench (or socket), 3/32” hex key, 9/16” deep socket. Mounting Oculus or Vive Sensors requires 1/4” drill bit and 5/32” hex key. Mounting RUDDO pedals requires 1/2” wrench (or socket) and 3/16” hex key.
[B]: RUDDO mount intended to be used on a soft surface (carpet, rug, etc). Please specify in order notes if using on a hard surface.
[C]: Display configuration is the responsibility of the user. The two included avionics displays have HDMI outputs. Upon connecting the two included avionics displays to the user’s computer via the user’s cables, the user will have two 12” 1366 x 768 displays (comparable in size and resolution to actual G1000) to configure as they wish. Due to the diverse combinations of simulation software, desired aircraft, desired avionics, main display resolution, etc. we cannot reasonably provide guidance that will cover all scenarios. Please refer to our Configuration section under the Resources menu for information on the two most common configuration methods. The Resources menu is located at the upper right hand section of the website.
[D]: Max width of office chair’s seat is 25 inches. Height must be adjustable so that seat cushion is roughly 18” from ground. Many customers remove office chair wheels to prevent chair from moving when using high-tension rudder pedals.
[E]: The Outside View Display stand has broad compatibility with displays that utilize a central stand as well as displays that utilize side feet. The distance been the outer edges of the side feet must not exceed 38”. We would be happy to verify fitment of your specific display prior to purchase - please specify in your order notes.
CURRENT LEAD TIME: 2 weekS
FOLLOW US ON INSTAGRAM FOR THE LATEST NEWS & MEDIA